Last Updated on September, 2021

A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons.

Indoor and outdoor LED displays.

This question is important because Outdoor Panels are generally more expensive than indoor panels. The main difference that will come is resolution. Outdoor panels are usually seen from further distance, thus resolution will be lower. Outdoor led panels will likely be brighter because they are used in sunlight. Also outdoor panels will be more durable as they need to withstand weather conditions, dust, moisture and dirt. Outdoor panels will consume more energy as well. On the other hand, indoor panels are less durable. For all these reasons, we recommend indoor panels, unless you actually need to use an outdoor screen.

We could give you an easy answer based on the space you have available. You don’t want too small of a screen, nor would you want too big of a screen in a small place.

The next important question to answer is how much space do you have on your stage? A general rule is to take the width of your stage and subtract 10 feet. For example, if the width of your stage is 50 feet, then a 40 ft. LED Wall would be appropriate.

The minimum viewing distance of your audience will depend on the pixel pitch of your panels:

P1.99mm: 6 ft.

P2.97mm: 8 ft.

P3.91mm: 10 ft.

P5mm: 15 ft.

Most common techniques are:

1) Ground Support Installation: This method system is a combination of a base-unit, connection bar and ladder truss that creates a very stable system to support your LED screens in various configurations and offers flexibility in height as well as width.

2) Flown Method (rigging): There are certain requirements that need to be in place in order to fly a screen. Most importantly, there needs to be ample structural support in the ceiling to hold the total weight of the screen. When someone says they want to Fly an LED screen, that means the screen will be rigged to either an overhead truss system, a ceiling grid, a crane, or some other support structure from above.

3) Wall Mounted: Some panels can be drilled and mounted into the wall. This is a great option if you’re looking for an aesthetically clean look with easy maintenance features, but it will add cost to the panels.

We include all costs in the overall quote. The cost of installation will depend on the method and size of the video wall.

-Indoor brightness: 1000-1500 nits

-Outdoor brightness: 3500-6000 nits

Pixel pitch is the distance from the center of an LED cluster (or pixel) to the center of the next LED cluster/pixel measured in millimeters. Resolution is the number of pixels contained in the physical area of your LED display. The more pixels you have per square meter, the more detail your wall will display. The general rule is 2.5 ft. per 1mm of resolution.

We offer high refresh rate panels. If you broadcast online, you’ll want to ensure your panels have a refresh rate no less than 3840 hz. Low refresh rate panels will result in wavy lines that will distract your audience.

Our warranty is included in the overall price. We offer a 3-year warranty on all of our LED Wall panels.

In the case that a pixel is out, we simply remove the module and replace it with a spare.

With LED panels you have the flexibility to create multiple designs and change the shape as many times as you want. Our team of technicians is here for you to help you to redesign your screen.

Most LED Panels are rated for 60,000 to 100,000 hours. You’ll have these panels for a long time and will get a lot of life out of them. In case something malfunctions, you can get in contact with us and we will give you all the information to properly service and maintain your panels.

There is no simple answer. These factors listed below will affect the overall cost.

1.) Pixel Pitch: The lower the pixel pitch, the higher the cost.

2.) Size: The larger the wall, the more panels you’ll need.

3.) Refresh Rate: Refresh Rates 3840hz and higher are referred to as “high refresh rate”. This will contribute to a high panel cost.

4.) Installation Method: Your installation method will affect the overall cost.